Ask The Wheelchair Ramp Expert
Terry Simmonds – has been involved with wheelchair ramps and providing advice on wheelchair ramps since 2002
If you have any questions on wheelchair ramps or disabled access in general, please ask below and we will publish your question along with the answer on this website.
Need to know about building regulations, how long a wheelchair ramp should be, when you are obliged to provide a wheelchair ramp, how steep should wheelchair ramps be or any other question related to ramps or disabled access just ask away.
*You acknowledge that we are free to publish any photos you upload
Alec
A. As you will see if you read the other answer, it is always a case of “It depends”.
If you are buying a wheelchair ramp solely for your own use and it is not part of a building work, you can effectively do whatever feels safe to you
Where it gets more complicated is when you are installing a ramp and it is classed as “building work”
The definition of “building work” can be found in PART M of Building Regulations
If it is “building Work” you will need to comply to Part M and also PART K of Building Regulations
Which section you need to comply to depend on what the building is
J.Painter
A. This really is one of those depends questions again – You really need to liaise with the building control division at your local council to find out what they will accept.
As with Approved Document M: access to and use of buildings – Approved Document B: (fire safety) comes in 2 volumes
1. Dwellings
2. Buildings other than dwellings
The main point to consider if it is a building other than dwelling, comes under Requirement B1: Means of warning and escape
b. All people can escape to a place of safety without external assistance.
source: https://www.gov.uk/government/publications/fire-safety-approved-document-b
Speak to your local council
Do I have to put a platform in approx £13,000 is there a cheaper alternative? Both myself and my wife are not in need of a wheelchair
A. You really need to liaise with your local building control to find out what they will accept.
Also, have a good read though PART M of Building Regulations –
Is there a reason why you are building it 1m higher than the outside ground level?
If it is classed as a steeply sloping plot (gradient exceeds 1:15) you can provide a stepped approach.
See 1.8 on page 5 of Part M (above)
The important thing is to liaise with building control before doing anything.
Get there clarification that it is classed as steeply sloping and that a stepped approach is allowable and you may not need ramps or lifts.
A. This is one of those “It depends” questions.
If you are buying a ramp for yourself, you know how able you are and provided your wheelchair ramp specifies it is OK to be used at a 1:6 gradient, it really is up to you as long as you are sure it is safe.
Where it gets more complicated is when you are providing the ramp for someone else to use.
You may not know their ability and what gradient they are happy with, some ramp manufacturers recommend no steeper than 1:8 where assistance is provided and 1:12 for independent use.
To work out length based on gradient you multiply the height of the step by the gradient.
In your example – height 6″ – gradient 1:6
Sum is H x G = L or 6″ x 6 = 36″
If the ramp is just for you, I would suggest you check your wheelchair instructions to see what gradient they recommend.